Select Page

Epoxy Floor Paint

Medal Epoxy Floor Paint is a high quality dual-pack paint, used to protect concrete floors in Shops, Factories and Garage Floors. Suitable where heavy traffic such as Forklifts and Pallet trucks are present. This product can also be used as a protective coating on steel products.

Soft Sheen

Matt

Application:  Interior & Exterior

Spread Rate: 6-8 m2 per litre
Packaging: 5L

COLOUR RANGE

White

Clear

Brilliant Green

Grey

Lustrous Stone

Disclaimer: Colours displayed on screen may vary from actual Medal Paints colours.

PRODUCT APPLICATION
  • Apply this product with a paintbrush, paint roller or airless spray using a +/- 500 μm Tip
  • Mix 4 litres of base paint with 1 litre hardener and leave for 15-30 minutes. Add 10% Epoxy Thinners (as and when required) and mix thoroughly to obtain a workable consistency. Smaller quantities must be mixed to the same ratio
  • Apply two coats for best results, allowing 12-14 hours to dry between coats
  • Clean tools with Medal Epoxy Thinners
PRODUCT BENEFITS
  • Dirt & stain resistant
  • Good durability
  • Excellent adhesion
  • Water resistant
  • Most mineral solvents, petrol & crude oil resistant
  • Alkali resistant
PRODUCT USES
  • Interior floors made from concrete
  • Suitable for garage, factory & shop floors and cold storerooms
DRYING TIME

Touch Dry: 45 Min
Hard Dry: 48 Hours
Recoating Time: 12 Hours

SPREAD RATE

6-8 m2 per litre

DATA SHEET

PAINT CALCULATOR

To determine how many litres of paint you will require for a specific job or project.

All you need to do is fill in the following: the total area you would like to paint in square metres and the average spread rate of the desired paint you will be using here.

Total Area (m2)
Spread Rate (m2/L)
Pack Size (L)
Total amount of paint required for 1 coat:
Total amount of paint required for 2 coats:
Number of paint cans required:

WP Feedback

Dive straight into the feedback!
Login below and you can start commenting using your own user instantly