Red Oxide Water-Based Primer
Medal Red Oxide Primer is an excellent water-based primer for steel and galvanised iron surfaces. It contains zinc phosphate and possesses tolerance to concentrated phosphoric acid.
Soft Sheen
Matt
Application: Interior & Exterior
Spread Rate: 7-9 m2 per litre
Packaging: 1L, 5L & 20L
COLOUR RANGE
Red Oxide
Disclaimer: Colours displayed on screen may vary from actual Medal Paints colours.
PRODUCT APPLICATION
- Brush, (Short Nap) Roller or Airless Spray
- Stir the contents thoroughly before use
- This product can be thinned down for spray application
- Allow +/- 4 hours drying time before applying the final coat/s of paint
- Clean tools with water
PRODUCT BENEFITS
- Excellent adhesion
- A sound surface for top coats
- Excellent rust inhibiting power
- Low VOC
- Tolerance to concentrated phosphoric acid
PRODUCT USES
-
Suitable for mild steel and galvanised iron surfaces
DRYING TIME
Touch Dry: 30 Min
Hard Dry: 4 Hours
Recoating Time: 4 Hours
SPREAD RATE
7-9 m2 per litre
DATA SHEET
PAINT CALCULATOR
To determine how many litres of paint you will require for a specific job or project.
All you need to do is fill in the following: the total area you would like to paint in square metres and the average spread rate of the desired paint you will be using here.
Total Area (m2)
Spread Rate (m2/L)
Pack Size (L)
Total amount of paint required for 1 coat:
Total amount of paint required for 2 coats:
Number of paint cans required:
Dive straight into the feedback!Login below and you can start commenting using your own user instantly