Select Page

Evercure EM22

Evercure EM22 is a cementitious powder based on a blend of various cements and binding agents. Evercure EM22 has exceptional adhesion as a primer for most surfaces. This product is mainly used as a damp-curing agent providing excellent protection against negative pressure. Evercure EM22 can also be used as a bonding agent onto substrates with difficult adhesion characteristics. It is primarily used as a prime-coat for waterproofing raw masonry surfaces.

Soft Sheen

Matt

Application:  Interior & Exterior

Spread Rate: 5-6 m2 per litre
Packaging: 1L, 5L & 20L

COLOUR RANGE

N/A

Disclaimer: Colours displayed on screen may vary from actual Medal Paints colours.

PRODUCT APPLICATION
  • Apply this product with a paintbrush
  • Aerate powder by shaking the bucket before mixing with water. Mix contents with water to a ratio 1:1 and stir thoroughly until homogenous with no lumps
  • Allow 30-90 minutes drying time between coats
  • Clean tools with water
PRODUCT BENEFITS
  • Excellent adhesion
  • Damp curing
  • Primer & sealer
  • Prevents rising damp in walls
PRODUCT USES
  • A primer used to protect and seal new concrete, plastered cement and asbestos/fibre cement prior to painting and waterproofing
  • Ideal for sealing reservoirs, dams and fishponds
DRYING TIME

Touch Dry: 30 Min
Hard Dry: 24 Hours
Recoating Time: 90 Hours

SPREAD RATE

5-6 m2 per litre

DATA SHEET

PAINT CALCULATOR

To determine how many litres of paint you will require for a specific job or project.

All you need to do is fill in the following: the total area you would like to paint in square metres and the average spread rate of the desired paint you will be using here.

Total Area (m2)
Spread Rate (m2/L)
Pack Size (L)
Total amount of paint required for 1 coat:
Total amount of paint required for 2 coats:
Number of paint cans required:

WP Feedback

Dive straight into the feedback!
Login below and you can start commenting using your own user instantly